A Guide to Tree Removal That Isn’t Dangerous

When you decide to take on a tree removal project, look over the details to make sure you’ll be able to do it. Some issues may necessitate the hiring of a professional to accomplish the assignment. You might be able to save money by doing the work yourself in some cases. their explanation
Examine the project’s scope.
Examine every aspect of the project before beginning to confirm that you are capable of handling it. Buildings, utility wires, plant growth, adjacent land, and driveways all have the potential to obstruct the job. It’s also possible that the area will appear drastically different when the tree is removed, so keep this in mind before making any permanent changes. You might not like how it looks once it’s been removed. If, on the other hand, the growth is fading or dead, you’ll likely have no choice but to remove it to keep your yard safe and presentable.
Get ready for the job.
Take note of the natural growth pattern, since this will be the ideal fall direction. Make a plan for where you’ll go after you’ve finished cutting. A chain saw will be required to cut down a huge object, while a hand saw will be required to cut down a smaller one.
The Removing Procedure
Making the undercut is the first step in the tree removal procedure. The direction in which the tree falls will be controlled by this v-shaped notch in the trunk. A 90-degree v-shaped notch is preferable to a 45-degree v-shaped notch. Make the notch depth one-quarter the diameter of the trunk. Make a back cut about two inches higher than the v-shaped notch on the other side of the trunk. The tree should start to fall in the direction of the notch once you make the rear cut. Turn the chainsaw off and walk away in the direction you intended to go. During the felling operation, stay away from the trunk. Working from the bottom to the top of the trunk, cut the branches away with the chain saw. You’ll have a simple log after you’re done. To make moving the log easier, cut it into lengths.
The Remainder of the Stump
For the remaining stump, you have a few alternatives. You can leave it be and let it decompose naturally. You can try to find it on your own, but it will be difficult. You can drill holes in it and fill them with chemicals that will help the stump decompose faster. You can also have it removed by a professional.